Fwd: [Chrysler300] G accelerator linkage
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: [Chrysler300] G accelerator linkage






A Metric bolt on a G?  The proper bolt is a 1/4 20 X 3/4 with a square nut.  The nut is square and it is is stopped by the bell crank so the bolt can be tightened without holding the nut.

On Tue, Sep 12, 2017 at 7:55 PM, Del Kerney del.kerney@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@yahoogroups.com> wrote:
 

Hello all,

    G failed to start last week and found that accelerator linkage under rams had fallen off bottom of bellcrank.   Anyone know the size of the bolt and nut that secures the pivot arm at end of accelerator shaft to bellcrank bottom ?   Couldn't find them in garage, driveway, street or on engine. 

Del Kerney




--
Marshall Larson



--
Marshall Larson


__._,_.___

Posted by: Marshall Larson <granitledge@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.