Re: [Chrysler300] 61 300G Tire size
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 61 300G Tire size





maybe 255/60R17 close to same OD as 235/75R15, but NOT 255/70R17

And need to get correct offset wheels and be careful of extra width relative to clearance especially at steering lock.

Edward Mills Antique Tractors 1930-1960 Antique Cars 1960-1985
On 11/25/2017 11:57 AM, Dan Akol danakolaia@xxxxxxxxx [Chrysler300] wrote:
 
Any thoughts on using a 255/70/17 instead of a 235/75/15 tire? 
They are the same height (29") but have a tread width on 8.2" instead of 6.2" and section width of 10.2" instead of 9.1"
Thanks, Dan

On Nov 23, 2017, at 7:57 PM, Michael Falcone <mjf175@xxxxxxx> wrote:

I have Diamond Back DB2 3" wide white wall radials 235/75/15 on my G. I am very happy with these. Diamond Back has a holiday sale this month. Check out there website for pictures and info.


-----Original Message-----
From: Dan Akol danakolaia@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: 2HsandaHeritage <2HsandaHeritage@xxxxxxxxxxx>
Cc: Michael Ashmore <michael.ashmore@xxxxxxx>; Chrysler300 <chrysler300@xxxxxxxxxxxxxxx>
Sent: Thu, Nov 23, 2017 6:53 pm
Subject: [Chrysler300] 61 300G Tire size

 

Hi All,
I'm finishing my 300G - I have 15" wire wheels - question is what size wide white wall tire is best and what are the best options for these tires? Thanks, Dan 





On Sep 5, 2017, at 12:43 PM, 2HsandaHeritage@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 
Mike,
Not sure if G is similar to an H, But I have used a bright pin point light and small flexible mirror to read the numbers on 62 - 413's with ac.
Doug Warrener



From: "'Michael Ashmore' michael.ashmore@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: "Chrysler 300 Club Int. Server" <chrysler300@xxxxxxxxxxxxxxx>
Sent: Tuesday, September 5, 2017 9:01:08 AM
Subject: Re: [Chrysler300] 61 300G

 
Another question for the experienced!
 
300G,  Is there any way to view the engine ID numbers on AC cars without removing the compressor/brackets?  Is there engine ID stamps anywhere else on the block?
 
Also is there any way you can move a power driver seat when the switch isn't working?  I wouild like to move the seat back manually if possible.
 
Thanks for all the help so far.
 
Mike 300G
----- Original Message -----
Sent: Saturday, August 26, 2017 7:47 PM
Subject: [Chrysler300] 61 300G

 
Hi All,
 
Now that I've sold my 61 Corvette my 61 300G gets all the attention!
 
Questions
 
1. What width size whitewall did the 300G come with?  I'm planning on buying Coker radials, The stock size was 8.00 - 15.  Would that equate to 225 70R-15?
 
2. I also need to do the brakes from stem to stern.  I was going to use NAPA for most of the parts.  Comments?  Recommendations?  Has anyone used s/s brake lines from Good Brakes or Brake Hoses Unlimited on EBay?
 
Thanks,
Mike  300G Barn Find




__._,_.___

Posted by: EMills_ATC <millserat@xxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.