[Chrysler300] 64 300 Coupe backglass replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 64 300 Coupe backglass replacement





Hi Group,

As the installation of back glass goes forward, I realize that more items need removal: rear seats to access removal of package tray, arm rests & window regulator handles.

I am awaiting delivery of reveal moulding clips for power lip of channel.

Okay, I might have this right, I believe the rubber gasket needs to be on the replacement glass, then fitted into the body flange, adhesive included.

Please let me know if I am wrong.

Cleaning the adhesive from very good rubber gasket was a Bear of an effort.   The GO-JO was hiding in all the grooves, lots of Goo Be gone  popsicle sticks and rags were used and discarded.    Rust removal in channel, finding what was left of Philips screws and grinding flush with Mr. Dremel, popping them out with small center punch to reuse hole locations.

Lots of patience in place.

Let me know of gasket installation.

Thanks All,

300 K-ly in VA,

Dave


__._,_.___

Posted by: Dave Dumais <dave.dumais@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.