[Chrysler300] Fwd: Unable to deliver your message
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Fwd: Unable to deliver your message







---------- Forwarded message ---------
From: Yahoo Groups <notify@xxxxxxxxxxxxxxx>
Date: Tue, Jul 17, 2018 at 2:44 PM
Subject: Unable to deliver your message
To: <russ300@xxxxxxxxx>



We are unable to deliver the message from <russ300@xxxxxxxxx>
to <chrysler300-noreply@xxxxxxxxxxxxxxx>.

Your message was sent to a group that does not exist.  Please check
to make sure you spelled the group name correctly.

For further assistance, please visit http://help.yahoo.com/l/us/yahoo/groups/original/members/forms/general.html



---------- Forwarded message ----------
From: Russell Vaughan <russ300@xxxxxxxxx>
To: Chrysler300-noreply@xxxxxxxxxxxxxxx
Cc: 
Bcc: 
Date: Tue, 17 Jul 2018 14:44:14 -0400
Subject: Various parts for '60 - '64 Chryslers
After over ten years, I have decided to finally be able to actually put a whole car in my car trailer as opposed to various parts from dozens of cars. I have parted many '61 through '64 Chryslers over the years and have various parts from those cars. I also have some new parts that were never installed.  Nothing to do handstands over, but parts that could come in handy should you need them. I can send pictures through a smartphone or an email sent directly to me at  -  russ300@xxxxxxxxx!  Shipping will be at cost from 01915.  I plan on attending the meet in September. I will gladly bring any purchased parts to the meet. Initially, I have some small parts, but some others are big.

First: a pair of PDQ 2-4800 rear axle universal joints  $10 each, $15 for the pair.  2: Pinion seal CR 18891 ($10) and SKF 18912 pinion seal ($20). Both for $25. Raybestos H1157K  11X3" Bendix brake shoe hold down kit $3  "62 outside remote rear view mirror complete with cables and dash mount for toggle. $50. Non-remote rear view mirror 2275015. No tilt base for L or R side. No pits, just normal wear.  $40. Inside rear view mirror for '63/4. Exceptionally nice head, pitted shaft. $25. Single power window switches for rebuild $10 pr. Fuel level sensor. I cannot verify accuracy but it did respond to a ohm meter $10  Chrome front door ash tray/lighter/PW switch Nykr '64  ('63?) $25/pr  '60 - '63 bucket seat back springs  $6/pr, '63-'64 Chrysler door handles and window cranks. -  '63-'64  #6 Newport standard handles, 4 NY door handles LH side, 2 RH side  1 single handle $25 for all!  - Cardboard light diffuser for pushbutton heater and transmission controls (pr) $5  Stainless headlight retainer rings  $5/pr  OEM Temp and oil pressure gauge senders $10/both.  Pass side (?)  front engine mount shield cleaned and repainted but driver quality only $5 Pr '62 Fuse box cover $5  Five pair front ball joints. 1 set LWB 3/4 nut, 4 sets 5/8  Premium brand Moog etc. Might be missing a nut or cotter pin or a spot of rust on the base from being out of the boxes, $40/pr  Sell ALL for $150. Last, for now, a full set of ARP head bolts that were installed and torqued but never ran. Short bolts have Turquoise paint on the heads. Retail for $132, sell for $80.  That's all folks! - for Now!   


__._,_.___

Posted by: Russell Vaughan <russ300@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.