RE: [Chrysler300] 1964 300 K convert gas tank cap
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 1964 300 K convert gas tank cap





Harry:

 

Be sure to get a “Vented” cap and one that has good “anti-splashout” capability as the tank filler sits so low.  Mine has this stamped into the steel:  “VENTED  ANTI-SURGE”.  No brand name and it fits a little loose so may not be the best one for the car and probably allows a little fuel loss when full and digging out.  Check it out at the store before you pay for it—if they trust you.

 

Rich Barber

Brentwood, CA (98..6F at 4PM—outside temperature, not me)

 

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of Harry Torgeson torg66@xxxxxxxxx [Chrysler300]
Sent: Wednesday, August 01, 2018 3:01 PM
To: Chrysler 300 List <Chrysler300@xxxxxxxxxxxxxxx>
Subject: [Chrysler300] 1964 300 K convert gas tank cap

 

 

I need a new one, mine was made in Mexico, does the group know of a decent one I could buy.

Thanks Harry



__._,_.___

Posted by: "Rich Barber" <c300@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.