Re: [Chrysler300] Driveshaft "clunk" on 1957 300C
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Driveshaft "clunk" on 1957 300C



In my experience with quite a few ball and trunion u-joints it is the outer cast iron housing that has always been the problem.  It's not so much the "clunk" as it is a vibration during low speed acceleration and again at highway speeds.  In more advanced wear condition the "clunk" becomes a bigger issue.  I'm presently running my '55 with a 3/16" spacer between the transmission output hub and the u-joint housing.  Having that spacer in place forces the balls to roll through an unworn range on the cylinder surface in the housing and vibration is completely eliminated.  Mine's not worn enough to cause a clunk. I have a new unit to install and that will happen before very long.
--------Marshall Goodknight

Please note: message attached

From: "Ray Melton rfmelton@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: Bob Merritt <bob@xxxxxxxxxxxxx>, "Chrysler 300 Club, Int'l" <chrysler300@xxxxxxxxxxxxxxx>, "kboonstra@xxxxxxxxxxxx" <kboonstra@xxxxxxxxxxxx>
Cc: Bob Merritt <bob@xxxxxxxxxxxxx>, "Chrysler 300 Club, Int'l" <chrysler300@xxxxxxxxxxxxxxx>
Subject: Re: [Chrysler300] Driveshaft "clunk" on 1957 300C
Date: Fri, 19 Oct 2018 17:21:06 +0000


____________________________________________________________
The #1 Income Investment Today
The Legacy Report
http://thirdpartyoffers.juno.com/TGL3131/5bca4d76713284d763843st01duc

[Non-text portions of this message have been removed]



------------------------------------
Posted by: "mgoodknight@xxxxxxxx" <mgoodknight@xxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.