Re: [Chrysler300] Parts Request

Unless Gary updated his catalogue in the past few years, I wouldn't expect to find those clips or accompanying pins for exterior SS trim there. These parts are like hens teeth. I managed to acquire just enough to complete my '65 300 by salvaging what I could save from three or four separate cars. If you're careful when taking the car apart, you have to push the pins back out from the inside. Some aren't accessible from behind and need to be drilled (sacrificed) to save the clip itself.

There is a company called Mr. G's Enterprises that I managed to buy some pins (and possibly clips) that were close, this was at least 15 years ago. You have to mic the pins and verify what you need before starting your search.. There may be other sources out there now but unless these pieces are interchangeable with many other cars, it's not likely. The lower trim is easier to solve than the uppers and the clips at the window bases are also a pain. Most of the pins there have to be drilled.

Ryan Hill

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of Noel Hastalis cpaviper@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: April 21, 2019 12:59 PM
To: John Holst
Cc: Chrysler 300 List; MiltonKarahadian@xxxxxxxxxxxxx
Subject: Re: [Chrysler300] Parts Request

John,

I suggest reaching out to Todd at Quirey in PA, who acquired Gary Goers’ business.

Go online to www.garygoers.com to get to Quirey’s website and Gary’s old Catalog #10 is scanned there in 2 sections. Once the parts are found in the catalog, call Todd to order, at 814-509-6410.

I wouldn’t look for a new online Quirey catalog for at least another year.

Noel Hastalis

Sent from my iPhone

On Apr 21, 2019, at 1:40 PM, John Holst jholst@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Passing along a request from a 300 Club Inc member. John...

Dear Webmaster,

Restoring my 65L . Repainting and have taken off all the stainless. As
you know the clips are brittle and very hard to save. I have some need a
lot. If anyone has any I would really appreciate any help. I'm in San Diego...
Thanks
MiltonKarahadian@xxxxxxxxxxxxx

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

__._,_.___

Posted by: Ryan Hill <ryan_hillc300@xxxxxxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___