Re: [Chrysler300] Looking For...

["John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

The current draw of an led is a lot less and with most directional signal flashers , they work by heat of the current drawn to thermally heat up a bimetallic strip that snaps open when hot causing flashing . Heat goes as square of current so your 2 pin stock “in series”  flasher May flash slowly or not at all . Some electronic or towing flashers work differently and do not depend on current . They may have 3 pins. The gauge regulator in our cars works the same way . 

 Keeping one real bulb probably helps the stock  flasher work better . 

“Your mileage may vary “

John G 

Sent from my iPhone not by choice 

On 12 Dec 2019, at 5:50 am, Charlie V cv300g@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

If you use LED bulbs for the taillights make sure you use RED LED Bulbs.

I bought White LEDS 's and was not happy with the outcome. I changed to the RED  bulbs and they look great.

Question : why can't you use LED bulbs in the front directional lights ? I have them in my 62 300 Sport Convertible and in my 65 Barracuda and that look great.

Charlie Valentine

On Wednesday, December 11, 2019, 04:02:15 PM EST, Noel Hastalis cpaviper@xxxxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

John,

I just spoke with Todd at Quirey, and he has no G lenses in stock. Anders Andersson in Lidkoping, Sweden is reproducing these lenses for various Forward Look years, and may be sending a set or two of these to Quirey in about mid-January. 

You can try polishing them as Bill Elder suggested. 

Also, a suggestion- a couple fellas I know are running LED taillight bulbs - that burn brighter and cooler. They do make a positive difference, as I’ll confirm, following John Begian in his G convertible to our Spring and Fall Meets this past year. Can only use the LED bulbs on the taillight lenses - not front directional lights. 

Noel Hastalis 

Sent from my iPhone

On Dec 11, 2019, at 12:54 PM, John Lau Mjdreamachines@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

  

Hello!

We are looking for tail lights for our 300G.  They look great in our museum, but when the brake lights are hit, they look very faded. I saw a pair on-line for over $700.. 😂😂😂😂

Is anybody making these?

Also, here is a link to our YouTube channel and our trip last weekend to the Petty Museum in Randleman, NC.  We took our 300G and needless to say, it was well received. Enjoy!

https://www.youtube.com/watch?v=gEislJ63R0s  

Cheers,

John

__._,_.___

---

Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___