Re: [Chrysler300] Window hand crank regulators 64 300

["Ray Jones 1970hurst@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Be very aware of the coil spring coming lode. It can take fingers off and worse. Tremendous energy is there.

If out and on your bench, clamp the arm to the framework before removing the winder gear set.

this applies to power windows also. Safest bet is to drill thru thr arm and frame and bolt them together.

On Fri, Mar 27, 2020 at 2:33 PM Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Hey guys,

With the inner door panel off, I can access the hand crank ( original crank/ gear has side to sidewear.)

It seems to be a split unit, with 3 rivets holding it to inside assembly.

Has anyone drilled the rivets and installed a crank/gear with no side slop?

Plenty of time to get details corrected,   be safe.

DAVE

--

Ray Jones. Y'all come on down an see us. Ya hear?

__._,_.___

---

Posted by: Ray Jones <1970hurst@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___