Re: [Chrysler300] 300 K motor mounts

["Noel Hastalis cpaviper@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Allan,

I'm no expert on this subject, but here's a suggestion - Try the link at the bottom of our Club emails - http://www.forwardlook.net/300-archive/search.htm#querylang. Once you click on this you'll see a 'search' box where you can type in a couple key words, and this will pull up many emails that have been shared between Club members over the past several years.

For example, here's a link to the archived email that's refers to Then and Now - http://www.forwardlook.net/300-archive/msg48046.html

Noel

On April 15, 2020 at 6:22 PM "ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

 

Thanks again, Bob Merritt for the pointer to check the motor mounts regarding my trouble removing the oil pan.

LH mount broke and sunk, RH is cracked on both sides. Plan L begins!

Can I ask for advice and comments as to rebuilding with Then and Now, or has anyone used any of the urethane repops?

Might anyone have some cores I could send if need to Then and Now be to hasten turn around time? I will send you mine to replace them. I would rather not leave the motor suspended for weeks on the lifts' cylinder alone.

Onward!

Al

 

 

__._,_.___

---

Posted by: Noel Hastalis <cpaviper@xxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___