That site could not be accessed. Available to members only? Rich B. in stir in Brentwood. I’m gonna break out! From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of John Sager cleanthegarageout@xxxxxxxxx [Chrysler300]
Sent: Wednesday, April 22, 2020 10:29 AM
To: John Grady <jkg@xxxxxxxxxxxxxxxxx>
Cc: Chrysler 300 List <chrysler300@xxxxxxxxxxxxxxx>; Matt Allyn <allynentertainment@xxxxxxxxx>
Subject: Re: [Chrysler300] 1962 383 Water Pump Housing Question Reading this reminded me of another bit of info I saved. Go about halfway down the page (pg8) and onto the next page for some flow test on various pumps. Good info on the subject and does show different pump configurations This is a really important subject ; Napa today gives you a 440 pump that “fits”413 but is often wrong . Some early pump block housings had steel plates inside to control flows or take up space behind impeller ? Minor things like temp sensors or bolt tappings , one can deal with but I believe there are at least two pumps and two housings if not 4 in the early B blocks and they have differing pump impeller depth spec . The plate or not is a variant too . Or maybe that fixes a too deep housing used elsewhere. Several wrong combinations fit ok but car will overheat .
I have never been a guy with all the part numbers in a book , — but if anyone really knows what the main variations of housing and pump are physically we can at least match correctly . On the other hand getting some of the early pumps can be frustrating — you get 440 pumps . . So if the original 413 pump fails get it rebuilt or get a kit , lacking solid info on crossing over — not hearsay. I think the AC / HD pumps had differing vanes too, from memory , —and while this may be wrong , I think oddly the ac or HD pump has fewer vanes which really confused me — seems backwards . Add that variation to set in depth and the plate or not , a lot of ways to go wrong .. Today I would tend to purchase an aftermarket or Mopar performance pump and housing in aluminum that go together , unless your old one is obviously correct / original and can be fixed . Also takes 25 lbs off the nose and will work right . I learned similar things from Don Verity on transmission parts , a big pile of seemingly the same pieces ( as I had stashed up ) do not swap , keep all parts from any one trans together or else a fiasco . That said if anyone knows about this , or maybe Mr Merritt already has it up somewhere , an explanation of the why —and physical differences —-would be really helpful . More so than numbers actually , although that helps . Posted as one 300 guy bitten by this .. Sent from my iPhone not by choice I don't know if this will help or not, but here's a list of casting numbers that I grabbed off the web some time ago. I make no promise of correctness. 1968 2780989 (w/ AC,HP)
2780988 (w/o AC) 2780988 2205873 (HD truck) N/A 2780989 (w/ AC,HP)
2780988 (w/o AC & Lt. truck) 2205873 (HD truck) N/A
1967 2780989 (w/ AC,HP)
2780988 (w/o AC) 2780988 2205873 (HD truck) N/A 2780989 (w/ AC,HP)
2780988 (w/o AC & Lt. truck) 2205873 (HD truck) N/A
1966 2525498 (w/o AC)
2585314 (w/ AC) 2585314 2205873 (HD truck) N/A 2525498 (w/o AC)
2585314 (w/ AC) 2525498 (w/o AC)
2585314 (w/ AC)
2205873 (HD truck) N/A
1965 N/A 2536725 (Hemi)
2585314 (Hemi w/o AC)
2525498 (Wedge) 2525498 (w/o AC)
2585314 (w/ AC)
2205873 (HD truck) N/A 2525498 (w/o AC)
2585314 (w/ AC) 2525498 (w/o AC)
2585314 (w/ AC)
2205873 (HD truck) N/A
1964 N/A 2448759 (w/o AC, exc. 300K)
2448758 (w/ AC, 300K) 2448759 (w/o AC, exc. 300K)
2448758 (w/ AC, 300K)
2205873 (HD truck) N/A 2448759 (w/o AC, exc. 300K)
2448758 (w/ AC, 300K) 2448759 (w/o AC, exc. 300K)
2448758 (w/ AC, 300K)
2205873 (HD truck) N/A
1963 N/A 1944916 (w/o AC, exc. 300J)
2240318 (w/ AC, 300J) 1944916 (w/o AC, exc. 300J)
2240318 (w/ AC, 300J)
2205873 (HD truck) N/A 1944916 (w/o AC, exc. 300J)
2240318 (w/ AC, 300J) 1944916 (w/o AC, exc. 300J)
2240318 (w/ AC, 300J)
2205873 (HD truck) N/A
1962 N/A N/A 1944916 (w/o AC)
2240318 (w/ AC)
2205873 (HD truck) N/A 1944916 (w/o AC)
2240318 (w/ AC) 1944916 (w/o AC)
2240318 (w/ AC)
2205873 (HD truck) N/A
1737706 Early 1958
1859251 Late 1958
1859634 59-60 w/ AC
1944916 1944916 59-63 w/o AC
1945421 60-61 HD Truck
2205873 61-68 HD Truck
2240318 2205862 61-63 w/ AC
2448758 2205862 64 w/ AC & all 300K
2448759 64 w/o AC, exc. 300K
2525498 65-66 w/o AC
2536725 2205862
2536767 1965 Hemi (Aluminum)
2585314 2468007 65-66 w/ AC
2780988 2780987 67-71 most w/o AC
2780989 2780987 67-68 w/ AC, HP Does anyone know the differences between a 1962 Water Pump Housing & other years?
I have one that is (I think) from 1965; for my 1962 383 build.. The 1962 temperature sending unit is a small diameter thing. This Pump Housing I have has a much larger diameter sending unit hole. I have a new water pump, listed for the 1962. This Pump Housing I have won't allow the water pump to seat inside it all the way; with out scraping the internal casting. I assume I need a correct Pump Housing and this one won't work for my build...? Anyone know what other years might be A-OK for a 1962 383?
__._,_.___
Posted by: "Rich Barber" <c300@xxxxxxx>
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
![]()
__,_._,___
|
