RE: [Chrysler300] Re: Axle seals
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Re: Axle seals

Thanks for that, I’m probably going to be redoing the axle in my ’60 New Yorker T&C once I get it running. It’s been sitting since 1978 and the pinion is already leaking.


From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of Lynn Dunsworth lynnrd37@xxxxxxxxx [Chrysler300]
Sent: Thursday, September 10, 2020 1:04 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Re: Axle seals



I recently rebuilt the rear axle from a '60 New Yorker.   The National replacement for the 1673373 is a 470487.  The outer seal is a National# 6241S.  I was able to get these through my local Carquest overnight.  Any good parts store or bearing supply should be able to get them.  The configuration will vary in different brands.  




Posted by: <nick@xxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.