{Chrysler 300} 64 300 map light switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
{Chrysler 300} 64 300 map light switch
- From: "'Dave Dumais' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
- Date: Thu, 12 Nov 2020 20:36:07 +0000 (UTC)
Rich and Group,
The map light is fixed. After tracing wires, all good , and comparing 2 light units , the conclusion is this.
The fiber board on actual switch was loose!
The fix was re crimping the switch base to upper area around board.
Once re crimped, the board is tight to the internal ground.
On to next issue.
Thanks All, Dave in hot spot VA
--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1867452379.2918386.1605213367552%40mail.yahoo.com.
Back to the Home of the Forward Look Network
Archive Sitemap