Re: [Chrysler300] door adjustments

["Michael James Chrysler300F@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

If by in you mean flush with the rocker, you may want to adjust the striker on the body of the car, not the door.


Sent from Yahoo Mail for iPhone

On Tuesday, December 8, 2020, 6:26 AM, RICHARD HUSS rhuss214192@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

I just tried to install “hang” the passenger door on my 300G I did nothing more than remove it and strip and prime it. now I can’t get the bottom of the door in far enough. I have adjusted the bottom hinge all the way in. It still is out a 1/4” + along the bottom. Top is fine. the front finder is lined up with the rocker so I don’t want to bring the finder out. Any hints?

Also I am still struggling with the hood shutting all the way. I am able to get both sides to close evenly but still up on both sides a 1/4 or so.

Thanks for any help before I take a hammer to it. Richard

__._,_.___

---

Posted by: Michael James <chrysler300f@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___