RE: {Chrysler 300} lights flickering

Joe-

First thing I would do is substitute a known good, fully charged battery. Then put a DVM (digital volt ohm meter) set to DC volts across the battery while the engine runs at high idle.

You ought to see between 13.8 and 14.2 volts.

If you see anything less you want to follow the shop manual procedure for full fielding the alternator. That will drive the alternator to full output and this test will demonstrate whether the alternator or the regulator is at fault. Follow the instructions which ate easy to do.

Often flickering lights and poor or no output from the alternator are indicative of one or more failed diodes. The shop manual procedure will get you a quick answer.

Dan

Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------

From: 'Joe Luciano' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>

Date: 10/31/21 8:07 PM (GMT-05:00)

To: chrysler-300-club-international@xxxxxxxxxxxxxxxx

Subject: {Chrysler 300} lights flickering

HI GANG.any idea's? lights flickering, wants to stall at idle. 62 sport.Joe Luciano Howard beach ny.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1048725030.1473712.1635725253253%40mail.yahoo.com.