Re: {Chrysler 300} Chrysler 63CR3 1963/64 Chrysler

The bad news is,It's part of a generic radio kit to install a cheap radio into a car built without one. The good news is that with a little surgery, it can be modified to fit the dash on a '63-'64

when you want to install an am-fm radio. Rarely did anyone remove an am-fm and go to the trouble to get the dash plate. You still need the chrome bezel and the steel mounting plate, but will all three, you've got everything you need.

On Sat, Nov 20, 2021 at 5:13 PM Mark Lindahl <mplindahl@xxxxxxxxxxxxx> wrote:

Hello All,

I have this Chrysler part/plate/Escutcheon. It is not aluminum. It is stainless steel. The size of the radio hole does not seem to be the size of a typical ‘63 Chrysler radio. Any help is appreciated to identify this part. Thank you.

Mark Lindahl

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/97F3E9B1-A57B-499C-A286-3704CAF11FBF%40sbcglobal.net.

Virus-free. www.avast.com