{Chrysler 300} 1959 300 E Starting up cold ….pumping gas
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 1959 300 E Starting up cold ….pumping gas




I have only had my 300 E for three months or so…it takes quite some time
to get the gas going into the carbs…I have 2 four barrel carbs which takes forever
to become full of gas so it will start.
I am seeking advice on the best procedure in starting to speed up the process.
I pump the gas pedal three or four times before I start cranking the starter…
is it better to pump while cranking or before. Any advice would be appreciated.
Yes once it has run for a while it starts right up easily.

Thanks
Rob Lutts  from Salem Massachusetts 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/2fba117a-e4e0-44b9-9d6f-4243dd251e15n%40googlegroups.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.