{Chrysler 300} Chrysler 300 Parts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Chrysler 300 Parts



Hi all,

I’m scaling down my parts inventory and have many boxes with NOS and good used parts primarily for ’56 Chryslers and 300B and C300. Many NOS obscure small parts. Occasional parts in ’60 - ’61.  Too many parts to list as there are about 20 pages of parts.

I would like to open my inventory to inquires for parts that many of you with primarily ’56’s may need. Many side stainless pieces as well.
I have most everything listed by part number which permits retrieval from inventory. If you don’t have a parts book to reference a parts number, it may take longer as I would have to do the parts book searching and referencing. Adding a picture with a description would help.

With the interest in keeping inquiries from clogging the 300 Club list server, please email me off list server at  cotejohnr@xxxxxxx and please sign your name and phone number.

And lastly, I still have some die stamped NOS quality 4 piece sets of door sill plates ready to ship for all 2-door ’55 and ’56 Chryslers.  Four piece set with mounting screws - $399 plus insured FeDex shipping cost. (also fit Imperial and DeSotos! ) 

Best to all,
John Cote
Guilford, CT

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/934881391.1113148.1649259752634%40mail.yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.