Re: {Chrysler 300} 1964 300K Idle

["'RONALD BUSENHART' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Have you had the engine compression checked out.

Sent from my iPad

On Jun 10, 2022, at 11:36 AM, Harry Torgeson <torg66@xxxxxxxxx> wrote:



I have a mechanic who has not been able get a smooth idle for me, I replaced the distributor with a pertronix 2 times, put back original distributor runs better, put in new Edelbrock carburetor, fixed intake manifold vacuum leak, also ammeter needle jumps when rough idle occurs, was worse with pertronix. Thanks in advance for any ideas on this issue.  

Harry Torgeson

971-221-4699

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAHChH_1Cs8J%2BzQqausXvgoCZPkJc8N69dwfwW2Z6Rq1P5uh_%2BQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/FEA5CA8A-9507-468F-9EAF-BEE542EF33AB%40aol.com.