{Chrysler 300} Pass door ass'y, fits C, D, E

[<finsruskw@xxxxxxxxxxxxxxx>]

Door is from a 300D

Door glass is broken but the PW operating system is in place and it works.
Vent widow frame and support is pitted but the glass is OK
Door handle is gone, no trim panels.
Hinges are there if you need them.
Weight as is will be near 70 pounds, unless you just want a bare door, removing these parts would lighten it considerably.
Adding a crate of some sort will add weight as well.
No damage to the door proper but there are a few pin point rust spots on the outside.
Most of the factory undercoating is in place yet

Nice straight door, all parts mentioned above included.

$300 for the door as is Plus crating & freight
FOB 52041, Eastern Iowa

 

Thanks for the ad!!

Dave Scwhandt

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/010901d90d97%2411d89650%243589c2f0%24%40iowatelecom.net.