Re: {Chrysler 300} Power Steering Gear
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Power Steering Gear



We had one , rebuilt by somebody , where seal was in wrong side of bronze bushing 
Unbelievable .
Yes can be done 
Sent from my iPhone

On Jan 2, 2023, at 9:52 AM, 'Donald Verity' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:


Hi Loren,
There will be a snap ring under the dust seal. After you remove that, put a pan under the steering box and start the engine. Turn the wheel all the way to one end, hold for a second, back off and repeat. The extra pressure will pop the seal out. Be careful putting the new seal in, as you can go to deep. Use the steel spacer and snap ring as a guide. 

Don




I am Loren Nelson and my 300G steering gear is leaking at the pitman arm. I have removed the pitman arm and seal dust shield. The FSM says to remove the seal with Puller C-xxxx. I don't have that puller and don't know where to get one. I tried O'Reilly's and they don't have a similar tool..I plan to remove the seal by drilling holes in the seal and use 1/4-20 sheet metal screws pushing on the end of a brass bushing that is shown in the FSM to be at or near the seal. 
My question for the Club members is this plan a good one or will I mess something else up in the process? 
Thanks,
Loren

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CANvhwYaUbsyDv9XJfzj9Ro1fCeyHoU%2B29xJZdp2EXybobWKKnQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1581732503.3015862.1672671123629%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/291A23E0-854E-467B-ACF6-A8F70329BFFA%40gradyresearch.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.