Re: {Chrysler 300} Advice for a Hurst that is new to Texas
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Advice for a Hurst that is new to Texas



Hi John;
While it's a bit easier, install an auxiliary Trans cooler. avoid using the cooler in the Radiator, as they can develop a leak and mix fluids. When you install, put rubber caps on the Rad. and leave it unused. Makes a awful mess. Anti-freeze in the Trans and Trans fluid in the Rad. Takes a lot of flushing of both to clean it up. Had this happen to my Hurst and to my Dakota.
Ray, enjoy your cruising, I really miss my Hurst.
Ray

On Tue, Jan 10, 2023 at 6:15 AM John Nowosacki <jsnowosacki@xxxxxxxxx> wrote:
Greetings from down south.  Having moved here fairly recently, I'm loving the fact that I'm still going to cruise nights during the week and car shows/swap meets on the weekends here in central Texas in January, but I know I'll be paying for it next summer.
On that note, I've pulled the radiator from my A/C equipped Hurst to have it pressure tested, cleaned, flow tested, etc. by a reputable radiator shop in the area.  I'm also taking advantage of the somewhat emptied engine bay to change upper and lower radiator hoses and heater hoses.
My question to the group is, I believe the thermostat in the car is a 190 degree unit, which never, ever gave me any issues on 90+ and humid summer days in New England, but with multiple 100+ degree days in my future, and while everything is out of the way, should I consider replacing the thermostat with one of a different value, such as 180 or even 160?
The A/C works fine as far as cooling is concerned, but there doesn't seem to be much difference in fan speed between medium and high speeds on the dash.  I'm hoping that with a flush, clean, flow and pressure test, when I put it all back together it will be quite some time before anything has to come apart again, so now's the time to decide on a value for the thermostat.  I've seen some things on the internet about people drilling 1/8" holes in the plate of the thermostat so there is some flow even before it opens on its own, etc., but I don't want to do anything strange to a car that has only overheated that one time I was doing over 100 mph and threw the small belt for the water pump pulley.  I don't do that dumb stuff anymore, but I will want to try to make the system bullet/Texas proof while I have it apart.  That radiator (original to the car) will be cooling the tranny as well as the motor, and will have the big condenser in front of it pulling Texas heat out of the interior, so any advice would be appreciated.
Looking forward to going to Fredericksburg this coming September, as it is less than 2 hours from my house, which is pretty much just down the street for Texas driving. ;-)

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD%2B8cns89qK7LCXY0b6zhwZVZQXVszH5ubzoo_7AGkiUSsVULQ%40mail.gmail.com.


--
Ray Jones. Y'all come on down an see us. Ya hear?

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD72c-zoEu1EictY-GY425t%2BFaq%2BZesd44MpJZtRDTvugyZmGw%40mail.gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.