Re: {Chrysler 300} 64 300 valve stems 14" wheel

On Sunday, February 5, 2023 at 05:28:22 PM EST, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

I just get valve stems from Napa. They have both diameters and various lengths based on what your wheel covers require. I wouldn't use metal ones on a 1964 as the factory wheel covers move around too much, especially if you're using radial tires.

On Sun, Feb 5, 2023 at 11:41 AM 'Dave Dumais' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

A chilly hello to All,

The original 64 14" rims use the premier 8139 TR 413 valve stem.

The rim hole measured .380"

Who has completed this issue before me?

A lots of TR 413 stems listed, most rim holes larger than .380

Thanks

Dave D.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1352728226.303865.1675626073208%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMbMS5DvyCvMaSLiYQHPkzuw45v%2B1j6ft-VMmf4Hn%3D8cQ%40mail.gmail.com.