Re: {Chrysler 300} 1962 Throttle Linkage Question

John

Sent from my iPhone

On Feb 14, 2023, at 9:48 AM, Ryan <ryan_hillc300@xxxxxxxxxxx> wrote:

Matt, have you had the frame (subframe) checked since the accident?

Ryan Hill

On Feb 14, 2023, at 4:54 AM, <finsruskw@xxxxxxxxxxxxxxx> <finsruskw@xxxxxxxxxxxxxxx> wrote:

If the engine moved during the accident then something is sprung or ajar as the bracket that holds the end of the rod would have moved as well.

From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Monday, February 13, 2023 10:06 PM
To: Matt Allyn <allynentertainment@xxxxxxxxx>
Cc: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx) <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} 1962 Throttle Linkage Question

Matt,

My ’64 has the same basic arrangement. If the rod is not level and the parts are not bent…then the bracket on the block must be lower than it was thus causing the downward slope of the rod.

Get someone with a ’62 to place a straight edge across the valve covers and measure down to the top of the frame rail behind the carburetor. Then check yours and see if the engine is sitting high or low. If it is then that is the issue. If not, then something in the linkage is bent.

James

From: 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Monday, February 13, 2023 13:23
To: MATT ALLYN <allynentertainment@xxxxxxxxx>
Cc: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx) <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 1962 Throttle Linkage Question

<image001.png>
(Now with the image…hopefully)
Matt Allyn

On Feb 13, 2023, at 1:21 PM, 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Hello All,

In my quest to put our ’62 300 Sport back together after a front end collision….
I have replaced all motor & trans mounts with new from Imperial Services; as the rubber had torn away from their steel cores upon impact.
I thought that would have fully restored and leveled the motor where it needs to live.

Yesterday I noticed that the Throttle Linkage was NOT 100% Horizontal on the Firewall.
The section that bolts to the Firewall, with its 3 bolts, is good.

But…
The Horizontal Rod that lives from Firewall & attaches to the top of transmission mount, with the plastic clip…
That Rod is slightly angled down.

In this image it seems 100% Horizontal.
I’m referring to “SHAFT 14-11-1”

<PastedGraphic-1.tiff>

Should that Horizontal Rod be 100% level?
If so I am doomed & need to investigate further where my issue is with the height of the drivetrain - Yay!

Thanks
Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DEBB87E9-6168-41A6-A1B5-554F5AC8984B%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/A8AA7BAA-3DED-4AD6-A9D9-8FC7C1699C63%40yahoo.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171992C8E228379486A7EEA93A29%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/00d001d94073%2489fa9de0%249defd9a0%24%40iowatelecom.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/SA1PR19MB706325E23488258FF51CE691C5A29%40SA1PR19MB7063.namprd19.prod.outlook.com.