RE: {Chrysler 300} 1962 Passenger Floor Aluminum Trim

Made mine from a piece of aluminum bar stock.

Rounded the edges, polished, bent using the originals as a pattern and drilled the holes.

Time consuming , yes but better than corroded junk.

Dave Schwandt

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Doug Warrener
Sent: Thursday, February 16, 2023 11:53 PM
To: D.C. Mason <petergriffinforpresident@xxxxxxxxx>
Cc: RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx>; Keith Langendorfer <keith_A_Lang@xxxxxxxxx>; Marshall Larson <granitledge@xxxxxxxxx>; kurt.brueske@xxxxxxxxx; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} 1962 Passenger Floor Aluminum Trim - Needed

Club member Michael Burke sold them in the past. He may still have a source or supply.

Sent from my iPhone

On Feb 16, 2023, at 1:03 PM, D.C. Mason <petergriffinforpresident@xxxxxxxxx> wrote:

I wonder if these have been repro’d before? We will need the passenger side too for a G:

🙀
<IMG_0191.jpeg>

Otherwise maybe the HVAC tape will work 😆
D&K
Sent from my iPhone

On Feb 16, 2023, at 1:01 PM, RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx> wrote:

Keith,
I have covered the strips with the stainless-steel duct tape , installing it carefully by hand and massage it and trim it, works well. I might also have more floor trim.

Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android
From: 'Keith Langendorfer' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Wednesday, February 15, 2023 3:56:18 PM
To: Marshall Larson <granitledge@xxxxxxxxx>; kurt.brueske@xxxxxxxxx <kurt.brueske@xxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 1962 Passenger Floor Aluminum Trim - Needed

Hi Kurt

Jean-Yves Chouinard may be able to help you.

Keith

On Feb 15, 2023, at 5:49 PM, Marshall Larson <granitledge@xxxxxxxxx> wrote:

Those pieces are aluminum but they are extrusions which have been polished, brite dipped, and hard anodized. They cannot be polished again unless the anodizing is removed first. Mine are much better than yours appear to be but I would like to improve them so I am trying to locate a company near me in FL. that will do it . No luck so far. Found companies but they haven't returned my calls.

You could do a google search for companies that do Anodizing in your area and p[ost what you find.

On Wed, Feb 15, 2023 at 5:10 PM Kurt Brueske <kurt.brueske@xxxxxxxxx> wrote:
Hello 300ers -

I set out to complete my final interior restoration task earlier today and discovered that the passenger polished aluminum floor trim is corroded and likely beyond repair.

Does anyone happen to have a set in restorable condition for the passenger side (front and rear) of a 1962 300H?

Pictures are attached.

Thanks!

Kurt
(402) 249-1549

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/be61bbbb-f85b-4589-ba35-43c3917a3cc2n%40googlegroups.com.

--
Marshall Larson
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACuDFNRAVzQ9TyNdqv9x-viNJF3Bw%2BurXXKN-CVX4OMohJc7FQ%40mail.gmail.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/8EC99A84-6C7A-4B4C-A7BA-0FABBB76FEF6%40yahoo.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY4PR2001MB18619FA16BDFE2EF503C7004D4A09%40CY4PR2001MB1861.namprd20.prod.outlook.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/BABD87C4-2675-4BE7-AC15-CEFCC5DDB391%40gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/5C1EA268-36B9-42E4-91E9-6068CB26D302%40comcast.net.

RE: {Chrysler 300} 1962 Passenger Floor Aluminum Trim - Needed