Re: {Chrysler 300} Source for a replacement generator ID plate?

A friend had one done. He said the ones on ebay are the wrong size. He said this place does it right but they are expensive. Nostalgic Reflections - Automobiles, trucks, tractors and more! Page 4

Nick.

On Thu, Mar 2, 2023 at 2:13 PM Noel Hastalis <cpaviper@xxxxxxxxxxx> wrote:

My just rebuilt 300-F dual pulley Autolite GJM8202A generator is missing its metal green and silver I.D. plate - see attached photo of what thi plate should look like, from my buddy's a/c 300-F.

Can you give me a source to purchase a reproduction plate? I can have it engraved.

Thanks,

Noel

<5255 F Troost F generator GJM8202A.JPG>

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/81AF9F36-7571-4C07-B05B-566AB33D2CD6%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFNpnnn_L3mMhhs0V4_jq%2BhOJAVgq%2Bfmzgcgc84v5DR%3DAQ%40mail.gmail.com.