RE: {Chrysler 300} 300-J test Ride
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: {Chrysler 300} 300-J test Ride



Indeed it did smoke the tires on the final test run and he sorted out all the other issues with the linkage and tuning.  .  The episode just recently ran and I think there was about 4 in total.  What I like about Nick is that he not afraid to admit when he unfamiliar or if he is struggling with an issue.  On of 300-J segments he fighting like hell with one of carbs but eventually sorted the issue. 

I am glad you left comments to dispel the misconceptions. He always invites viewers to share their knowledge, it's the audience... .  and I myself am learning more and more about these wonderful cars. I am hooked, line and sinkered in this culture now (thank you Pete Kearing;). 


Oh and one other thing, in my initial email I re-read it and it is unintentionally  misleading.  This is not my J but it is almost exactly like mine except mine has A/C and to the best of my knowledge original.  I hope to her ready in time for the show. 

Patrick

 

On April 20, 2023 at 2:03 PM Carl <cbilter@xxxxxxxxx> wrote:

I finally found my Google account password, which allows me to comment on YouTube.  Some of the comments from viewers were a bit irritating, but mostly just reflected a severe lack of knowledge about letter cars, and I felt compelled to start offering comments in order to dispel misconceptions and lack of understanding of the 300J and ram engines.  Might be a waste of time, but it never hurts to share some knowledge about letter cars.

 

I did receive a response from Nick, who finds the information helpful.  He has learned a boatload about crossram engines and the J in particular over the last few months, which is a very good thing.  This particular J with fresh gas, further tuning, and getting the timing and linkage set right should yield performance like we know a J is capable of.  Even with a hydraulic cam, that car should incinerate the tires with a full throttle launch with 500 ft-lbs of torque.

 

Carl

 

From: Dan Plotkin
Sent: Thursday, April 20, 2023 11:41 AM
To: 'Patrick Monaghan'; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Cc: krz46@xxxxxxx; petekearing@xxxxxxx
Subject: RE: {Chrysler 300} 300-J test Ride

 

Great Job Pat. I enjoyed the Youtube Video. Nick seems like the right guy to work on it, and it sounds good too!

 

Danny Plotkin

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] On Behalf Of Patrick Monaghan
Sent: Monday, April 17, 2023 9:12 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} 300-J test Ride

 

Hi Everyone,

I hope the club finds this interesting.    I recently purchased a 300-J and in the process of restoring her.  The photos are mine and Youtube link is from Nick's Garage in Canada .  He did rebuild on it.

https://www.youtube.com/watch?v=rq1MpOJmBr0

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1508125424.487767.1681780312270%40myemail.cox.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/001801d973a6%24f1206de0%24d36149a0%24%40northeastretail.com.

 


 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/64417e62.4a0a0220.88ebe.724bSMTPIN_ADDED_MISSING%40gmr-mx.google.com.


 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/225210866.654946.1682016659985%40myemail.cox.net.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.