|
Hi All, I took the door panel off for the first time on the 300K. It is a good news bad news sort of thing. The steel inside the door and down on the bottom of it looks like it left the factory last month. Stellar. The door panel has some warping on the bottom, but I think I can wet it and press it back to flat. The window regulator is another story. Someone with little knowledge got in there and really screwed it up. The one thing I know for sure is the gear is bad. I did not see it on the club website. Is the person who was making the gears in the tech section sill making or have
them? Also, if anyone has a door panel off on a ’63 or ’64 could I trouble you for a photo? I think someone cut and messed with the brackets that hold the motor and regulator to the webbing. I photo would help me to figure out what it should
look like. Thanks, James For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171AA3583BF0DC2022D0AAF93699%40CY5PR19MB6171.namprd19.prod.outlook.com. |
Back to the Home of the Forward Look Network
Archive Sitemap