Re: {Chrysler 300} Accelerator Pumps

agree pia , ethanol causes white crud sticks the brass valve . some one should make a delrin or ? one

Sent from my iPhone

On May 25, 2023, at 2:49 PM, saforwardlook <saforwardlook@xxxxxxxxx> wrote:

What do folks in the Club do to Keep Accelerator Pump discharge check valves from sticking shut from today's garbage fuel.? After taking my 300F to the California meet in September of last year, in just 3 months the nozzles in both carburetors stuck shut and now I want to drive the car again and it looks like I need to take both carburetors off and apart to free them up again. I don't recall having this happen so quickly in the past but even draining the tank and putting in fresh fuel before the meet, this still happened more quickly than before. Maybe here in California there is even more ethanol going into our gas but this is really getting old.

I can go to airports and get non polluted fuel but that is both inconvenient and expensive. In this state, there are no regular non ethanol fuel stations.

Does anyone have a better way to unstick the discharge valves?

Thanks
Steve Albu

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/6451f06c-7b97-4f68-a151-07886cf25e07n%40googlegroups.com.