Re: {Chrysler 300} 1964 Sill Plates New

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

Vans Auto made them and sells them for $350 plus shipping. Someone said they're nice but not as thick as the originals so you have to be extra careful not to over tighten the screws.

On Thu, Jul 6, 2023, 8:43 PM 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Has anyone purchased a set of these new manufacture sill plates?

 

https://www.ebay.com/itm/174977769041

 

Even with the shipping at around $475 one would be hard pressed to get a shop to restore a set for that price. That is assuming they are as good or better than the factory units.

 

James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61710C7C0F630DF4E0AFA15E932DA%40CY5PR19MB6171.namprd19.prod.outlook.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMXi_ogD4H5N5ZQXz8QLEAcE0Nn3EOfx%2B07VFy7jq%3D%3DXg%40mail.gmail.com.