{Chrysler 300} F/G/H console attachment question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} F/G/H console attachment question



Folks

Does anyone recall/know what screws/bolts were used to attach these to the floor pan ? Mine were inexplicably removed by the prior owner (or maybe the folks who put an MP3 jack into his radio - no clue). 

I tried a longish #10 sheet metal screw but I don’t think that’s what was used, although I could be wrong - maybe a smaller size?

Anyway, any help would be most appreciated. I have an original 1960 Mopar parts list binder but it doesn’t get into that level of detail.

Thanks in advance,

Keith

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/92CA2CC1-1746-4219-8DD5-28B417D5A8B7%40yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.