Re: {Chrysler 300} Amount of spray paint for ram manifolds?

[Noel Hastalis <cpaviper@xxxxxxxxxxx>]

Nick,

 

Last year had my rams and balance tube bead blasted, light gray epoxy primered, then I used less than 2 spray cans of Cummins Diesel Engine Red to finish them. 

Photos - 1) epoxy primered; 2) photo 7/31/23 with 5,000+ miles on the rebuilt motor since last August. 

 

Noel

Sent from my iPhone

On Aug 22, 2023, at 10:24 PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

Need to order spray paint for a set of arms and balance tube. I'm thinking three cans will be enough. Has anyone done this job who can confirm.

 

Thanks, Nick

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFPqwNv%3Dn%3DFV5TZbrMf5_UJpbKVvNOG%3DCLW0Z465pz9EHQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/BFC372C3-3D69-4C94-B2A3-288A277DFA0D%40comcast.net.