Re: {Chrysler 300} 300F Engine Dyno Results
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 300F Engine Dyno Results



I will try this again. For cylinder sleeves, go here.

https://dartonsleeves.com/company/

On Fri, Jan 12, 2024 at 9:10 AM Marshall Larson <granitledge@xxxxxxxxx> wrote:
If you want to see how Dyno pulls are generally done, go here.



If you are looking for cylinder sleeves, go here.
Toll Free: 1 (800) 71-DARTON
sales@xxxxxxxxxxxxxxxxx

On Thu, Jan 11, 2024 at 4:43 PM 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
Fred,

I assume that after break in the shop did a compression and leak down test to confirm the sealing of the cylinders. I would like to know if they did and then two other items.

1. Exactly what rings were used.
2. What sleeve material was used and where was it sourced?

As an aside I would also like to know what the shop charged for doing 8 sleeves.

I am out of town right now, but I found someplace on the internet the Chrysler dyno sheets for a 1959 413. You can check and see look at those curves and compare them to what you got. If you cannot find them on the internet let me know and when I am home next week I can email them to you.

Best, James.

-----Original Message-----
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Frederick Grossi
Sent: Thursday, January 11, 2024 9:53 AM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} 300F Engine Dyno Results

Hello Group,

The rebuild on my 300F engine has been completed and the engine rebuilder sent it to the dyno for break-in, running condition and leak detection.
The engine is stock, stock carburetors and ram intake manifold, stock bore (it was sleeved because of pitting on a couple of the cylinder walls), as stock a cam as you can get, same crankshaft and pistons.  The engine was rebuilt by someone else in 1995 before I owned the car.  The engine was bored .004 at that time.
My rebuilder wanted to share the results with our group to see if anyone else had similar experiences:

Maximum engine torque - 2,900 rpm- 496 ft. lbs.
Maximum horsepower -     4,600 rpm - 316 hp

The horsepower is about 16% lower than factory specifications of 375hp.
Has anybody else had this differential in hp from factory?  Is this normal?

Thank you,
Fred Grossi
Pegram, TN

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/77C09F61-5406-4B5C-981F-549299D1AA02%40gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61714FE6A0AB281DD594F16A93682%40CY5PR19MB6171.namprd19.prod.outlook.com.


--
Marshall Larson


--
Marshall Larson

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACuDFNR4Yp2yLbC75eacnA89G9_YSM4-8RgVqeTcTZrMg1AuXw%40mail.gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.