RE: {Chrysler 300} Fasteners needed.

["Ron Waters" <ronbo97@xxxxxxxxxxx>]

Rich –

 

Those look like 1/4 x 28. Am I correct ?

 

Try searching ebay. I’ve found oddball stuff that matched up perfectly with the originals. Or you can try Fastenal or McMaster-Carr.

 

Ron

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of Rich Barber
Sent: Monday, January 22, 2024 8:06 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} Fasteners needed.

 

Does anyone have an extra ten or a source for ten of these radiator support to inner panel fasteners for a ’61?

 

Rich Barber

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/012a01da4d98%2462f01580%2428d04080%24%40ez2.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/002d01da4d9b%24f37c9a30%24da75ce90%24%40comcast.net.