Re: {Chrysler 300} 300B wire harness recommendations
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 300B wire harness recommendations



I just saw this and (I hate to admit it) my 55 Imperial - looked almost (not quite) as “crispy” - 

I know the feeling especially after I removed it and found the same exact issue: it was actually brittle…and when I turned on the headlights the relay would actually turn them off after a few minutes.

You are doing the right thing!
Hank


On Feb 26, 2024, at 2:14 PM, Justin I <captjj28@xxxxxxxxxxx> wrote:


Thanks for the input regarding 300B wiring harness last fall; I spoke to Rhode Island Wiring Service and I'll be ordering a full harness in the next few weeks.

However, a new question came to mind: Should I consider adding a fuse to the ammeter feed?  What is the prevailing opinion for fire protection?

Thanks,
Justin in PA

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of Ron Waters <ronbo97@xxxxxxxxxxx>
Sent: Tuesday, August 29, 2023 9:02 PM
To: 'Justin I' <captjj28@xxxxxxxxxxx>
Cc: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} 300B wire harness recommendations
 

Hi Justin –

 

Your wiring situation is a fire waiting to happen. The car should not be driven until the harness is fully replaced.

 

Ron

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of Justin I
Sent: Tuesday, August 29, 2023 11:22 AM
Cc: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} 300B wire harness recommendations

 

All,

 

Thank you for the advice and recommendations!

 

I am a bit hesitant to start this job since I do not plan to pull the dash; perhaps spot repairing is the best course of action at the moment (?).  However, the visible wires are in very poor condition.  They appear to be rubber coated and the insulation crumbles easily... the cotton covers basically turn to dust when handled.  Below is a picture of the wiring block on the core support.  Not much color left for ID either.

 

This B is not optioned up (no pwr seats, no pwr windows, no AC), which should make it a bit easier.  But if I do order a harness, I'll try to get every last wire on the car.

 

-Justin

 

<image001.jpg>

 


From: John Lazenby <french_fryguy@xxxxxxxxx>
Sent: Monday, August 28, 2023 3:46 PM
To: apozdol@xxxxxxxxxxx <apozdol@xxxxxxxxxxx>; John Nowosacki <jsnowosacki@xxxxxxxxx>
Cc: Justin I <captjj28@xxxxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 300B wire harness recommendations

 

John,

 

The name you were looking for who did the 300C looms is club member Greg Lettatt who lives in Canada.  He did one for me used in our 300C.  The quality was and is great, but I think Greg retired from that project many years ago.  

 

John Lazenby

 

On Monday, August 28, 2023 at 12:27:30 PM PDT, John Nowosacki <jsnowosacki@xxxxxxxxx> wrote:

 

 

When I restored my 57C, there was a club member who was doing an excellent job with reproducing the wiring harnesses for that year, but I don't think he is still making them anymore.  Can't remember the name as it was around 20 years ago.  Man, is time ever flying by.  I used the Rhode Island outfit in the 90's when I did my 55 C-300, and it worked fine.  Both cars were being completely taken apart, so it was easy to do the dash wiring with the dashes out of the cars.  I don't really want to even think about having to do the G convertible underdash wiring harness, or the harness for my Hurst, especially if trying to do them with the dash still in the car and an old man's eyesight and dexterity.  Yikes!

 

On Mon, Aug 28, 2023 at 2:12 PM <apozdol@xxxxxxxxxxx> wrote:

I have not used these folks in the past, but I did keep their website in my bookmarks. They say they can restore or reman ones original harness.

 

https://aeromotive.us/industries/automotive/

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Justin I
Sent: Monday, August 28, 2023 10:59 AM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} 300B wire harness recommendations

 

Hi Club,

 

There has been a rash of wiring related fires in the classic car circles that I associate with, so I figure it's time to stop tempting fate. 

 

I found a few recos in the ForwardLook discussion forums, but I can't seem to figure out how to search the 300 listserver archives.  The two outfits I've found so far are:

 

YnZ's Yesterday's Parts

Rhode Island Wiring Service Inc.

 

Does anyone have first hand experience with either of these vendors, or are there other recommendations?  I do not have a "show" car, but I'd like something that is plug-n-play (mostly) and something that looks more/less original (cloth covers).  Please let me know!

 

-Justin in PA

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DM4PR05MB943966380E34C0727FF7DB31C3E0A%40DM4PR05MB9439.namprd05.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/000e01d9d9e3%2478a93920%2469fbab60%24%40comcast.net.


 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD%2B8cnscE%3Dyw-ohgUZsSGVUXyz5epxfJPbCZLYXFa%3Dhdkt7bfg%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DM4PR05MB9439F890A6E36365ADEAA1A3C3E7A%40DM4PR05MB9439.namprd05.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/002c01d9dadd%24a36abfd0%24ea403f70%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DM4PR05MB94394B434AF3BEFF62DB97A7C35A2%40DM4PR05MB9439.namprd05.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/C08D24E5-3A17-46AE-8134-FC493665025B%40hallowellbrooks.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.