Re: {Chrysler 300} CVT top goes down not up
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} CVT top goes down not up



I had that problem with my K convert.  The top needed manual help to go up , but went down without a problem,  The problem was solved with a thorough cleaninfg of the brushes in the motor.  No guarantee that is your problem, but it soved mine.
Regards,

Pete Fitch
On Tuesday, May 7, 2024 at 04:44:59 PM EDT, Ron Waters <ronbo97@xxxxxxxxxxx> wrote:


Tim –

 

It’s a sealed hydraulic system. One side is responsible for the lift; the other side is for lowering the top. The ‘lift’ side has filled with air, due to a breach somewhere in the system. Possibly at one of the connections. Beware that you may have a puddle of hydraulic fluid to clean up. Check by the pump. Also check below the pistons used to raise and lower the pump. Tighten those brass connections. Clean up the mess and refill the pump. Then bleed the system.

 

Ron

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of Tim
Sent: Tuesday, May 07, 2024 4:25 PM
To: 'brianwolfe67' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} CVT top goes down not up

 

I will start by admitting I am not the most mechanically inclined. However I purchased my 61 300g a few years ago and there was some leak issues in the hydraulic lines for the top. I had my local mechanic take it apart look at it we ended up replacing both of the compressors or lifter pumps, and filled and bled all the lines. Everything seemed to be good for a year. Last year when I went to put the car away the top would not come up it took a couple people manually to lift it and close it for the year. I backed the car out of the garage this spring and it went down perfectly fine I tried to bring it back up with no luck. So I'm wondering if people have thoughts on how I can direct my mechanic on this type of an issue. Power Top goes down fine, but does not come up.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/663a8e24.630a0220.cd809.b767SMTPIN_ADDED_MISSING%40gmr-mx.google.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/001a01daa0bf%245dc4fec0%24194efc40%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/928419039.142679.1715172091794%40mail.yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.