Was working on our 300 Sport today. Seem to have some mystery electrical things going on…. Mystery Issue #1: I wanted to check the front running lights. Pulled out the Headlight Switch 1-click to activate them. There is a high pitched hum (or whine) coming from the headlight switch. And the passenger inner indicator, little green arrow was illuminated. Neither bulb, up front, came on, so I pulled the lenses & discovered dead bulbs. I replaced both bulbs in front of the car & rechecked it all. Passenger one works fine now & the dash arrow was not illuminated on the passenger side anymore. Drivers one is super dim (at the bulb) and the dash arrow on the drivers side is now lit up. I had used electrical cleaner spray inside both bulb sockets & also used it on the connector for the front indicator that lives in between the radiator & the grill. Anyone know what causes the bulb to barely illuminate in running lights mode, yet its other filament flashes bright in indicator mode? Mystery Issue #2: The electrical hum at the headlight switch. What the heck does that mean? Thanks! Matt Allyn
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/11EFC506-45C1-416E-BC69-54431954FE17%40yahoo.com. |