{Chrysler 300} More on belts...300K

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hi All,

 

I just scored five halfway decent tan 1964 Hickok belts off eBay. As long as two sets are good enough for the rear, I will be happy as in a couple of weeks when the rear seats are done, I do not want to have to pull them out again.

 

Now a question. I have seen someplace a diagram for 1964 C-Body on there you drill holes for the rear seat belts. But now that I need that diagram, I will be darned if I can find it. I looked in the assembly manual and I looked in the service manual. Nothing.

 

Has anyone out there have one of the usual included sheets that would come with a pair of factory seat belts in the box with the location points for 1964?

 

I know I have seen it! I hate it when I cannot find something.

 

Best, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171D3FE82C45B34B284C5039355A%40CY5PR19MB6171.namprd19.prod.outlook.com.