Re: {Chrysler 300} A466 Torqueflite transmission cooler lines

[Michael Van der veen <michaelvanderveen8@xxxxxxxxx>]

Hi all,

We worked out that it's the lower fitting in the drivers side of the transmission and that pipe heads to the right side of the (car) cooler (passenger). I wanted to know as I fit a one way valve to stop torque converter drain back causing leaks when sitting.

Thanks Nick 

Mike

On Tue, Jul 22, 2025, 11:14 AM Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

Does anyone know off hand, which way the cooler lines are attached to the transmission? Is the top one fluid returned to the transmission or fluid from the transmission to the cooler?

Thanks, Nick

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFNqgY%3DcdxPHcPkMkCkAaigtHLhnWcTWKKp2Y-QSjpiYDg%40mail.gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAPtwmMGB_UFZnzL8Q8sN61f7%2BHbRmVvmsjQGvfVAHOkqrTwoxQ%40mail.gmail.com.