{Chrysler 300} f and G Parts

[Frank Hinmon <fhinmon@xxxxxxxxx>]

I have the following for sale I can supply picture upon request 

A pair of torsion bars 75

7 button radio with foot button. 176.83

Spare tie (toilet seat) really good shape 325

2 2903S carbutators  dirty but everything is there and I free turning. 1200

Dual point tach drive distributor turns free bit could use rebuild. 350

Lots of interior and exterior stainless 35 each 

Long moulding on side with short painted ends 425

F motor and transmission , bellhousing  heads semi cleaned hot tanked  block mated ok as well as the heads machinist recommended to .030, crank may polish ok but will clean for sure 10-10  trans is apart everything is good but could use new planetary and gaskets  rockers all look fine rods are fine oil pan is ok but some dents in the bottom need to be worked out  code on motor P47 3 10.  $2300

4 G hubcaps one has some dents 350

Rear window defogger. I think it’s all there 100

Wheel drip mouldings 150 a pair

Have other misc parts

Frank HInmon
661-809-7994

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CDED6050-E370-43DD-A85A-EF7898A33BB7%40gmail.com.