Re: {Chrysler 300} 1962 Windshield Washer Pump

There is no bracket for the bottom of the bag. It should have a clip that goes through the lower gromet and into a square hole in the pump cover.

On Sunday, September 14, 2025 at 07:42:27 PM EDT, Rich Barber <c300@xxxxxxx> wrote:

Mine is just like that and has no hook—but it should have. Pretty sure I have seen a bracket with two hooks at top and one at the bottom.

Sorry.

Rich

From: 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Sunday, September 14, 2025 4:01 PM
To: Charlie V <cv300g@xxxxxxxxx>
Cc: Rich Barber <c300@xxxxxxx>; Dave Mihalko <davemihalko@xxxxxxxxxxx>; Kevin deGraauw <kdegraauw@xxxxxxxxxxx>; Club Chrysler <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 1962 Windshield Washer Pump

Where does the Bags lower grommet hole secure too?

My area with the top hanger & the current pump below….

Matt Allyn

On Sep 14, 2025, at 3:50 PM, 'Charlie V' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Matt, this is the proper washer bag for a 1961 and 1962 Chrysler that uses the electric washer pump.

The bag that uses the cap with the hole in it uses a pump that's foot operated .

Charlie

On Sunday, September 14, 2025 at 06:28:58 PM EDT, 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

This one is like mine, without the lower hole / grommet:

herbsparts.com

Matt Allyn

On Sep 14, 2025, at 3:21 PM, Rich Barber <c300@xxxxxxx> wrote:

Is there a washer bag available that has a bottom outlet and a hole in the bottom edge to hook over the hold-down hook on the bag support bracket? Bottom hold down grommet and hook are necessary to prevent the fan from eating the empty bag. Don’t ask.

Rich Barber

From: 'Dave Mihalko' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Sunday, September 14, 2025 4:30 AM
To: Kevin deGraauw <kdegraauw@xxxxxxxxxxx>
Cc: Matt Allyn <allynentertainment@xxxxxxxxx>; Club Chrysler <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 1962 Windshield Washer Pump

Quirey makes a correct one that mounts to existing holes
Dave
Sent from my iPhone

On Sep 13, 2025, at 10:50 PM, Kevin deGraauw <kdegraauw@xxxxxxxxxxx> wrote:

No one has parts to rebuild them and I think they reproduce these still.
Kevin

Get Outlook for Android
From: 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Saturday, September 13, 2025 6:32:35 PM
To: Chrysler 300 Club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 1962 Windshield Washer Pump

Anyone tried to rebuild one of these little pump motors?
Easy?
Or stay away?

Thanks
Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/3B255DBB-9930-4F5A-8886-630536FD933E%40yahoo.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/IA2P220MB198897F72C3BF50F929CEDEEB20AA%40IA2P220MB1988.NAMP220.PROD.OUTLOOK.COM.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/60B3210A-6CFE-46DF-BDDE-C03917C36C0D%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit
https://groups.google.com/d/msgid/chrysler-300-club-international/6E4C7889-3369-46F8-B717-E1B942943BEC%40yahoo.com
.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1680108490.3535962.1757890253965%40mail.yahoo.com.
<Washer Bag.webp><Foot Pump.jpg>

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/76C7C078-4B29-4890-A73A-76AE8FF568F6%40yahoo.com.