
I replaced my 57C wiring with a complete set of harnesses from Greg. I may have bits and parts of the original Mopar harness somewhere, and you would be welcome to have them as an example if it does you any good.No charge except the shipping cost.Keith Boonstra--On Sat, Oct 17, 2026 at 8:52 AM Travis Baker <travisbaker4@xxxxxxxxx> wrote:Hello,--
I am looking for a schematic or diagram showing the wire routing for the custom wiring harness made by Greg Leggat for the Chrysler 300 C and D models.
If anyone on the list server has a copy or can point me toward where I might find one, please let me know. Any help would be greatly appreciated.
Thanks,
Travis
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAL3Tkn0PQ1%2Bz%3DpwKKCXoiBvgJTt1oRY2JYL8M34MCZT6MPckwA%40mail.gmail.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CABYqBVp1h6FoeH1kjrUcJK4PJ60GjyANharwMdar48YC6W%3DWDA%40mail.gmail.com.