http://www.forwardlook.net/59sportfury-archive 1959 Plymouth Sport Fury Mailing List RSS feed at ForwardLook.net en-us postmaster@forwardlook.net (The Forward Look Network) Copyright (c) 1997-2009 The Forward Look Network as a compilation work postmaster@forwardlook.net (The Forward Look Network) 2009-03-11T21:15:04-05:00 http://www.forwardlook.net/images/fwlbevelsm.jpg http://www.forwardlook.net http://www.forwardlook.net/59sportfury-archive/msg00380.html Dan Morton 2009-03-11T20:43:21-05:00 Folks,   The 59Plymouth Mailing List is moving -- along with the entire '59 Plymouth (and Sport Fury) website.  When it's back -- there will be nothing for you to do:  I'll send out an email to this list, announcing we're back on line. p; The new website ... http://www.forwardlook.net/59sportfury-archive/msg00379.html eddee 2009-03-09T09:09:35-05:00 Hello Members I continue to clean up from the restoration. No space here on LI for anything excess.   I have a rolling engine stand for the 350/361/383 engines. I THINK it will also take the 413/440 I bought it new from MANCINI and used it once (of course)... http://www.forwardlook.net/59sportfury-archive/msg00378.html eddee 2009-02-12T17:56:13-05:00 SOLD Thanks to all----- Original Message -----From: eddee@xxxxxxxxxxxxxDate: Thursday, February 12, 2009 5:24 pmSubject: [59plymouth] ANYONE WANT A HEATER SWITCH???To: 59PLYMOUTH@xxxxxxxxxxxxxxx> Hello Members> > Today I have a used but good plastic heater... http://www.forwardlook.net/59sportfury-archive/msg00377.html eddee 2009-02-12T17:24:36-05:00 Hello Members   Today I have a used but good plastic heater and defroster vacuum control switch P/N 1842490. This is for the 59 plymouth with the 5 button switch.   I am cleaning out my spare stuff.   ANYWHERE USA for $6 total   First email takes it   ED E... http://www.forwardlook.net/59sportfury-archive/msg00376.html Curtis Danners 2009-02-02T08:28:02-05:00 Title: Message Hi John.  we had our tail lights done at the Chrome pit in Winnipeg. great job and very reasonable pricing. check them out on line. www.thechromepit.com curt http://www.forwardlook.net/59sportfury-archive/msg00375.html Dan Morton 2009-02-01T20:34:31-05:00 Hi Johnnie -- welcome to 59plymouth.net!  It's too bad you didn't leave the tail lights behind on the East Coast -- I highly recommend Frankford Plating in Philadelphia, PA.  Still, I am sure there are reputable chromers in your neck of the woods as well.... http://www.forwardlook.net/59sportfury-archive/msg00374.html John 2009-02-01T17:25:06-05:00        Good day all 59 Plymouth riders,            I live in North Dakota and I just lately had to go out to the east coast to pick up my 59 Plymouth Fury. One like the one I had back in 63. I was told that there would not be anything that I would have to... http://www.forwardlook.net/59sportfury-archive/msg00373.html Dan Morton 2009-02-01T15:23:21-05:00 Did you get a buyer yet, Ed?  I'll post to our list as well... http://www.forwardlook.net/59sportfury-archive/msg00372.html Mark Evans 2009-01-06T15:16:23-05:00 Does anybody out there have a spare 1959 Plymouth Hood and or Trunk  in decent condition, that they want to part with?   After priming the ones I have, it would look a lot better with a lot less work if I could start with something in better shape.   Plea... http://www.forwardlook.net/59sportfury-archive/msg00371.html eddee 2009-01-02T15:56:52-05:00 THEY HAVE BEEN CLAIMED Thanks to all http://www.forwardlook.net/59sportfury-archive/msg00370.html eddee 2009-01-02T15:23:27-05:00 Hello members I am selling off my spares......................I need the space!!!   Would anyone be interested in a BRAND NEW set or 'WALDRONS' stainless steel tail pipes for 59 PLYM 2 dr h/t (FURY, SPORTFURY)   They are 2" for either the 318 or 361   HOW ... http://www.forwardlook.net/59sportfury-archive/msg00369.html Dan Morton 2009-01-01T21:23:21-05:00 More videos!  Here's a collage from "Falling Angels" (Thanks, Ron):   http://59sportfury.net/ephemera/video/Movies/slides/FallingAngels.html   And here's a TV News spot on the movie "That Night", as well as clips from the movie itself (Thanks, Curt): p; h... http://www.forwardlook.net/59sportfury-archive/msg00368.html Dan Morton 2008-12-31T16:26:05-05:00 More Movies:   http://59sportfury.net/ephemera/video/Movies   New and updated members in the Showcase:   Aivar Lejins  -- http://59sportfury.net/showcase/SportFury/LejinsDieter Bauer  -- http://59sportfury.net/showcase/Fury/BauerEarl Hess  ;  -- http://59... http://www.forwardlook.net/59sportfury-archive/msg00367.html eddee 2008-12-28T15:50:50-05:00 HELLO GROUP HAPPY HOLIDAYS!!!!!!!!!!!   Our SPORTFURYs came with the size 24 battery ,,,correct????? Did we have green battery caps????   Thanks to all ED ECKERSONLI  NY http://www.forwardlook.net/59sportfury-archive/msg00366.html Mark Evans 2008-12-23T15:28:38-05:00 Happy Holidays to the Group My Christmas present came early this year. The body was mounted back on the frame this week. Everything came back together nicely, without any extra shimming. I am still looking for, 1 Cup Shim ,that goes between the frame and t... http://www.forwardlook.net/59sportfury-archive/msg00365.html Dan Morton 2008-12-17T20:17:02-05:00 Johnnie,   By all means, you should join the grand-daddy of all websites -- www.forwardlook.net.  But hopefully by now you've also discovered www.59plymouth.net!  If you're not a member of the forum, please join -- membership is free. ; Welcome aboard! bs... http://www.forwardlook.net/59sportfury-archive/msg00364.html John 2008-12-17T18:01:00-05:00 Hello,             Could some one send me the 59 fury sites where you buy and sell and the 59 car clubs that one can join.             Late this fall I just bought my 59 fury like the one I had when I got out of the Navy back in 63.     sp;  sp; p; Thank ... http://www.forwardlook.net/59sportfury-archive/msg00363.html eddee 2008-12-07T15:59:33-05:00 Hello Members   Could someone please advise me the correct size and configuration of the MUFFLERS on the SPORTFURY??   IE: length of the oval cannister,,,inlet location (center?) outlet location (side?)   THANK YOUED ECKERSONLI  NY p; http://www.forwardlook.net/59sportfury-archive/msg00362.html eddee 2008-11-30T16:00:18-05:00 Hello Members   On the 59 JIFFY SYSTEM,,,,,,I think this would pertain to the 1959 PLYM DODGE and DESOTO,,,,,,,,,,What is the correct placement of the bag hangars???????????   Does the bag hang off of the front 3 inner fender bolts (directly along side of ... http://www.forwardlook.net/59sportfury-archive/msg00361.html eddee 2008-11-26T15:14:59-05:00 Hello Members   I have a NEW MELLINGS oil pump for the 350,361,383,413s   It was primed, painted, installed but NEVER run.   First come gets it for shipping of 10 lbs   ED ECKERSONLI  NY http://www.forwardlook.net/59sportfury-archive/msg00360.html eddee 2008-11-19T16:05:57-05:00 It has been 'claimed'!!   Thanks for you interest http://www.forwardlook.net/59sportfury-archive/msg00359.html eddee 2008-11-19T15:43:02-05:00 Hello Members!!   I had some custom SS cooling lines made up for the 59 PLYM with V8-TORQUEFLITE.    To make a long story short--I have a left over that I hate to 'DEEP 6' so first come first servered.   Just packing and shipping to your zip code.  It will... http://www.forwardlook.net/59sportfury-archive/msg00358.html Dan Morton 2008-10-28T20:01:03-05:00 This from Gary Pavlovich, over on the Forward Look mailing list…  Gary also wrote privately:   Dan,   Thank you for the referral; let me know if I can help your group with any of the Poly parts.   I do have all grinds of Poly High Performance Camshafts as... http://www.forwardlook.net/59sportfury-archive/msg00357.html Mark Evans 2008-10-24T11:13:41-05:00 Thanks Dan, This also happened to me, however the root cause for my puddle under the car was the Transmission Safety Switch developed the leak. Either it dried out or developed a crack from over tightening. I replaced the switch and the leak was gone. Neve... http://www.forwardlook.net/59sportfury-archive/msg00356.html Dan Morton 2008-10-23T18:11:59-05:00 Good advice from the Forward Look mailing list! Dan http://www.forwardlook.net/59sportfury-archive/msg00344.html Mark Evans 2008-10-17T13:48:50-05:00 Good Afternoon Group,   After a long wait it is now time to assemble my body of my 59 Convertible back onto the frame.     Most of my body mounts and bolts were rusted out or lost during the disassembly. Especially the front fire wall mounts   Does anybod... http://www.forwardlook.net/59sportfury-archive/msg00343.html Dan Morton 2008-10-17T10:49:32-05:00 ...please ignore. Dan http://www.forwardlook.net/59sportfury-archive/msg00342.html Dan Morton 2008-10-07T19:21:35-05:00 Folks,   In moving the list from the old mail server to the new mail server, I inadvertently permitted anyone to email the list -- including spammers -- not just list members.  This has since been corrected.  Sorry for any additional spam load!   sp;;p; D... http://www.forwardlook.net/59sportfury-archive/msg00341.html eddee 2008-10-07T07:00:13-05:00 HELLO MEMBERS   Can someone please advise the correct routing for the right front brake line?   I am not sure (ON THE 59 PLYM) if the line runs completely in front of the crossmember,,,,,,,,,, or if it ducks in back of the motor mount frame bracket on the ... http://www.forwardlook.net/59sportfury-archive/msg00355.html Fredric Puckett 2008-10-07T04:59:58-05:00 Tired of being the laughing stock of your buddies in the locker room? Tired of not being able to make your girl climax over and over again? What you need is a larger manhood and thicker tool. http://heldnach.com/ http://www.forwardlook.net/59sportfury-archive/msg00354.html Richard Martin 2008-10-06T20:46:15-05:00 Tired of being the laughing stock of your buddies in the locker room? Tired of not being able to make your girl climax over and over again? What you need is a larger manhood and thicker tool. http://fendgrid.com/ http://www.forwardlook.net/59sportfury-archive/msg00353.html Teri Hankins 2008-10-05T23:15:43-05:00 "Ever since I started on your herbal supplement, Sharon says sex is so much more pleasurable for her, and she comes much more easily". David, Florida, USA Be the stud in 2008, and achieve all your dreams of super size! http://nextloud.com/ http://www.forwardlook.net/59sportfury-archive/msg00352.html carce pandora 2008-10-05T18:26:50-05:00 approved prescriptions overnite see us http://www.forwardlook.net/59sportfury-archive/msg00351.html Loyd Gallegos 2008-10-05T16:37:53-05:00 There's no battery in these replicas just like the real ones since they charge themselves as you move. Delightsome Bvlgari watches at Replica Classics http://nextmite.com/ http://www.forwardlook.net/59sportfury-archive/msg00350.html Bertie heidenreich 2008-10-05T13:43:48-05:00 Anstellung zu vergeben!!! ubidsenk@xxxxxxxxxxxxxx http://www.forwardlook.net/59sportfury-archive/msg00349.html Katiejack 2008-10-05T10:23:10-05:00 Dan, good to go for me on mailing list.   John Quinn Denver 59 fin Convert Arvada,ColoNew MapQuest Local shows what's happening at your destination. Dining, Movies, Events, News & more. Try it out! http://www.forwardlook.net/59sportfury-archive/msg00348.html Shelby Colvin 2008-10-05T07:13:23-05:00 If you are looking for a stylish, quality costume watch at low prices, our offers are for you. We specialize in top quality replica watches. Wearing these expensive looking watches is prestigious. Buying these models you will save you a ton of money and al... http://www.forwardlook.net/59sportfury-archive/msg00347.html Gladys Crum 2008-10-05T04:00:07-05:00 "Ever since I started on your herbal supplement, Sharon says sex is so much more pleasurable for her, and she comes much more easily". David, Florida, USA Be the stud in 2008, and achieve all your dreams of super size! http://darbglen.com/ http://www.forwardlook.net/59sportfury-archive/msg00346.html Tom Fox 2008-10-04T11:47:41-05:00 Hi Dan,   Looks like I am still on your list!   Tom http://www.forwardlook.net/59sportfury-archive/msg00345.html Dan Morton 2008-10-04T09:57:32-05:00 ...you can ignore this message.  But if you get it -- feel free to post your inquiries to 59plymouth@xxxxxxxxxxxxxxx again!   Dan http://www.forwardlook.net/59sportfury-archive/msg00329.html eddee 2008-09-11T12:26:28-05:00 Hello Group   Unfortunately my power steering mechanism in my 59 PLYMOUTH is leaking and needs a rebuild.   The removal of the box seems clear and not too hard since the egine is out of the car,,but any words of experience???   Can I leave the steering whe... http://www.forwardlook.net/59sportfury-archive/msg00328.html eddee 2008-08-20T16:58:25-05:00 HELLO MEMBERS   On the 59 models with the 361/383,,,,,was the original upper fastener for the starter motor a bolt or a stud and nut combo   THANK YOU ALLED ECKERSONLI  NY http://www.forwardlook.net/59sportfury-archive/msg00327.html Dan Morton 2008-07-29T19:29:53-05:00 Hi Ed -- not sure if you got an answer to this question.  But I just now went out and looked at Faulkner.  My ballast resistor is hanging from the top left bolt of the master cylinder, hanging down, maybe 160 degrees.  Your mileage may vary!     p; Dan http://www.forwardlook.net/59sportfury-archive/msg00326.html eddee 2008-07-28T12:55:00-05:00 HELLO GROUP   Is the correct mounting for the ballast resistor on the upper stud of the master cylinder?????   Thanks to all ED ECKERSONLI  NY http://www.forwardlook.net/59sportfury-archive/msg00325.html Dan Morton 2008-07-28T07:42:51-05:00 ...with a decided '59 Plymouth bent.  So, sue me!   http://www.59plymouth.net/Events   Got a '59 Plymouth?  We expect to see you next year for the 50th Anniversary, so start planning your trip now!   Thanks to Ron and Matthew Keij, Curt Lamdin and Bill Ta... http://www.forwardlook.net/59sportfury-archive/msg00324.html eddee 2008-06-30T09:33:12-05:00 http://www.forwardlook.net/59sportfury-archive/msg00323.html Gino S. Gentile 2008-05-15T20:29:47-05:00    Hi All,               Looking to do the timing on my 59, it has a 318 30 over and a dodge crank. What will be the timing degree. It has never been timed properly, The PO which was my father in law, passed away right before Christmas and we never got to... http://www.forwardlook.net/59sportfury-archive/msg00322.html eddee 2008-05-15T14:17:22-05:00 http://www.forwardlook.net/59sportfury-archive/msg00321.html Dan Morton 2008-05-10T16:55:01-05:00 Ed, I was about to get my vent window repaired with these guys, before I found a replacement:   http://www.muggyweld.com/   If you call, they may be able to tell you of someone in your area that uses their material.  I've heard good things about them, but... http://www.forwardlook.net/59sportfury-archive/msg00320.html eddee 2008-05-10T12:20:55-05:00 Hello Group   Mistakenly ,,,we cracked the right side rear antenna bezel! OUCH!!!!   DOES ANYONE have a spare they would be willing to sell?? ----------------------------------------------------------------- Does anyone know of a company that repairs heavy...