
Re: Hoods (was RE: '64 Plymouth b-body grille and aluminum molding)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Hoods (was RE: '64 Plymouth b-body grille and aluminum molding)
- From: Dan McCormack <mcwheels@xxxxxxxxxxxxxx>
- Date: Sat, 19 Jan 2008 16:35:57 -0500
That doesn't surprise me. I had the privilege of knowing Carl Cameron before
he passed away last year. Carl was the chief designer of the 66 Charger and
the 67 Dart. He was also responsible for the front end of the 70 Challenger
which was actually one of his alternate designs for the front end of the 66
Charger. One of the many things Carl told me is that back then Plymouth
designed their cars first and the Dodge designers had to use the same doors
as Plymouth. I have 2 friends that are racing 66/67 Chargers and they both
replaced the die cast grills and rotating headlight assemblies with aluminum
grills and headlights from 67 Coronets which took 200 lbs. off the nose of
the car.
I always get a kick out of going to Moparfest in Canada and seeing all the
Darts with Valiant front ends or vise a versa and Canadian Valiants that are
really Darts. And the 50's Canadian Dodge's that are Plymouths with Dodge
front clips.
I was surprised however that with such a radical change to the cowl between
63 and 64 that it looks like the same hood and front clip will bolt up to
both years.
Dan
----- Original Message -----
From: <bschleic57@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, January 18, 2008 3:15 PM
Subject: Re: Hoods (was RE: '64 Plymouth b-body grille and aluminum molding)
I would say that is likely.? Surely someone on this page has/had one of
these cars with the "wrong" front clip somewhere in their past.? I'm
pretty sure that the 63 and 64 hoods are the same, outside of the
letters/trim.? That would pretty much ensure that the fenders etc would
fit.?
FYI, I had a 67 Satellite with a 66 Coronet front clip(see pic)?that fit
perfectly.? This is after all how they cobbled up the Canadian models for
years...
WHS
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
Back to the Home of the Forward Look Network