Re: Rhetorical question - any ideas besides a heat wrench?

[Bill <Y1TopBanana73@xxxxxxxxx>]

I've been using PB Blaster and Liquid wrench. I unfortunately don't
have a cutting torch, only a small propane torch so I was going to try
heating the adjuster block first to see if it will let loose. If it
still won't budge, I might see if a friend of mine has a torch and cut
& replace them. It ought to make quite a bang when the t-bars unload
though!!!

No weight on the suspension...car is jacked up by the K-frame. This
thing site so low right now that I don't think I could even get to the
adjusters without it up in the air.

Bill M
65 Coronet 500 'vert

On Sun, May 11, 2008 at 12:32 AM, Dave Casey <dcasey@xxxxxxxxxxxxx> wrote:
>
>  Do you have the weight off the suspension when you're trying to adjust it?
>  Other than that, soak & pray. You may have to torch it and replace the
> adjusters.
>
>  Dave Casey