Re: Max Wedge Aluminum Fan

[Jason Chance <j23@xxxxxxxxxxx>]

According to the literature, the 64 426III did come with an al 7-blade 
viscous drive fan.
The A864 Hemi came with the same fan for the early production than later 
switched to a steel model.
The A990 Hemi came with the al 7-blade viscous drive fan.

The part number should be 2585375.

Jason




Nick Tiberio wrote:
> I've picked up a 7-blade aluminum fan. The seller told me that it was 
> used on the 426III wedge, 864 hemi, & A-990 hemi. I've never come across 
> an aluminum fan before. I sold my '64 426III back in the 70's and 
> remember nothing about the fan. I'd like to use this fan on my new max 
> wedge
>
> It does have several markings plus the D over C, large P over D. I see 
> this on many parts including my light lens. What does DCPD stand for.
>
> I'll try to link a photo of the fan.
>
> http://s329.photobucket.com/albums/l380/FuryUs63/?action=view&current=fan.jpg
>
>
> Nick Tiberio
> FuryUs63
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
>
>
>   


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.