Rich, I have forgotten what your wheels look like. Do you have a pic
that
you could e-mail me? What width are the ones you are using now- Rim edge
to
rim edge or bead to bead? I got your note about where you got
them.........................MO
{Steve Mick}
http://www.1962to1965mopar.ornocar.com/mick64.html
----- Original Message -----
From: "Rich Kinsley" <rlkinsley@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, March 24, 2010 6:51 PM
Subject: RE: wheels wanted
>
> Steve, you know my car well. It's basically like yours but I have a 489
> rear-end if yours is different. I have the P255/60R15's and they fit
> fine as you know. Just a reference point for you.
>
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> ====================================================================
> Steve Mick wrote:
>>
>> Thanks all for your responces, Again I learned from the good folks on
>> this
>> mai-list. In using 8 inch wide rims which are actually closer to 9"
>> rim
>>
>> edge to rim edge. I may be cutting things to close for my fenderwell
>> clearance. Most of the recommendations for the tire size I want to
>> use
>> calls for the 8" I am thinking cheater slicks or stickey street tires.
>> I
>> have a chance at 7" cop wheels close to me and priced at $30 for the
>> pair. I
>> think I will go ahead and buy them so I can mock them up and get
>> actual
>> clearance measurements. I am sure at that price, I could probably swap
>> meet
>> them and make a couple bucks. Any more input is welcome and if someone
>> has
>> one or two of the 8" wheels, let me know. I have possibly found one.
>> Thanks
>> all.........................MO
>> {Steve Mick}
>> http://www.1962to1965mopar.ornocar.com/mick64.html
>>
>> ----- Original Message -----
>> From: "MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>
>> To: <1962to1965mopars@xxxxxxxxxx>
>> Sent: Tuesday, March 23, 2010 1:28 AM
>> Subject: wheels wanted
>>
>>
>> >
>> > I need a pair of 4 1/2" circle Mopar steel wheels 15x 8 with
>> > backspace
>> > right at the center ( about 4 1/2 inch from the inner rim edge.) I
>> > have
>> > been told that an earlier Dodge Ramcharger had these as OEM wheels
>> > Anyone
>> > know if that is right or have some wheels to sell?
>> > Thanks...............................MO
>> >
>> >
>> > {Steve Mick}
>> > http://www.1962to1965mopar.ornocar.com/mick64.html
>> >
>> >
>> > ----
>> > Please address private mail -- mail of interest to only one
>> > person --
>> > directly to that person. I.e., send parts/car transactions and
>> > negotiations as well as other personal messages only to the intended
>> > recipient, not to the Clubhouse public address. This practice will
>> > protect
>> > your privacy, reduce the total volume of mail and fine tune the
>> > content
>> > signal to Mopar topic. Thanks!
>> >
>> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>> > http://www.1962to1965mopar.ornocar.org/mletiq.html and
>> >
>> >
>>
>
>
>
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person. I.e., send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will
> protect
> your privacy, reduce the total volume of mail and fine tune the content
> signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>
>
Back to the Home of the Forward Look Network