Re: 65 Belvedere, S6 cooling issue.

[Ollie <satellite1965@xxxxxxxxxxx>]

Mike,
Couple questions..are you using a after market temp gauge or just the 
original dash gauge? I would verify the temp with a good gauge....I remember 
last summer we fixed my buddies Chevy overheating problems by trashing the 
cheap aftermarket gauge replacing with a autometer gauge.
Change the fan to a 6 blade...used in AC cars
I would not think u would need a shroud on a /6 with no air.
Radiators get price scary. You can almost get a custom built aluminum 
radiator for a copper core rebuild.
Ollie
----- Original Message ----- 
From: "Mike and Linda" <miclinmopar@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Thursday, May 20, 2010 9:36 PM
Subject: 65 Belvedere, S6 cooling issue.


> I only have a few miles on the car since buying it.  I'm just trying to 
> build up some confidence in it.  After my first 20 mile run, the eng. 
> seemed to run hot, so I replaced all the hoses, waterpump and put in a new 
> 180 deg. thermostat.  The radiator shop cleaned the radiator a fixed a few 
> leaks that popped up after cleaning, but said it fragile.  Currently, no 
> leaks.  I went to install a clutchfan, but its 3' tall and hits the 
> radiator - so I had to reinstall the measly 4 blade.  No shroud 
> unfortunately....
>
> No one makes and aftermarket on for this year.  I don't want to pay big 
> bux for a recore either.  Is there another application that would fit? 
> One that maybe has a similar hose layout and provision for a shroud?????
>
> thanks
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.