4 speed swap

[Scott Mirabella <jmirab2972@xxxxxxxxxxx>]

Hey Guys,
I'm in the middle of a 4 speed swap from a 64 (ball & trunion) to a 70 
a-833 from a charger. I did have to switch the bellhousing (larger 
bearing retainer) and I'll need a new speedo cable or adapter. But my 
big problem is the tranny mount. The new tranny mount location seems to 
be about an inch and a half foward of the old one. And now no longer 
lines up with the crossmember. i know there has been discussion of this 
swap before. Any ideas on what mount to use and where to get it? 
Thanks alot for any help!!

Scott Mirabella
1964 Fury Convertible
383 4speed
LongIsland, NY


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.