Clutch-brake pedal assembly part

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

When I got my 64 Dodge B body, I noticed the C-B assembly was loose under 
the dash.  Today I found I am missing a piece of it.  It appears to be a 
plate that goes accross the top and has a plate welded at a right 
angle(vertically) that goes on the left side. This plate is where the rod 
that the pedals hang from goes thru the left side.  If you look at the front 
of the main bracket, you will see three vertical pieces that the C B  pedal 
rod goes thru. the part I need is bolted on and is the third plate to the 
left, the end of the rod goes thru it.  I called Brewers and they said this 
part is not available through them.  I could also use the rod and the over 
center spring.

Anyone have at least that left side bracket they would sell me? If you 
prefer, e-mail me at  micher@xxxxxxxxxxxxxxx
Thanks for any help.......................MO

{Steve Mick}
http://stevemick.shutterfly.com/pictures#Part%202 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.